| www.bluestar-forensic.com | HOME | WHERE TO BUY | DOCUMENTATION | CONTACT US | |
ECOSPRAY
|
||||||||||||||||||
|
ECOSPRAY works like a gun paint sprayer. The BLUESTAR solution is sucked up from the container and is sprayed by the gas propellant in vapor phase. The performance of the metal jet nozzle is far superior to what you might obtain with a hand pump sprayer or a common aerosol, as you can see below: |
|
![]() |
![]() |
|
Notice the difference in size and distribution between the Ecospray (left) and an ordinary hand pump sprayer (above). These tests were carried out in the exact same conditions (same fluid, same distance, same kind of surface). |
|
The exact bloodstain pattern is of acute importance for analysts. It provides a better understanding of what happened at a crime scene.
In some cases, the crime scene investigator might have to reveal bloodstains on non porous surfaces, such as acrylic paint, ceramic, glass, marble, etc. Because BLUESTAR FORENSIC is dissolved in water, spraying the reagent on such surfaces, especially vertical ones, will cause drippings, thus irreversibly distorting the initial bloodstain pattern. This is prejudicial to subsequent blood pattern analysis.
To solve this problem, it is necessary to spray the smallest mist of the reagent possible on such surfaces. It is almost impossible to spray such a fine mist using a common pump sprayer. ECOSPRAY diffuses BLUESTAR in such a fine mist that the risk of drippings or spreading the blood trace is minimized. With a little training, the bloodstain will not drip or run.
With a lesser quantity of reagent sprayed and coming into contact with blood, the reaction will be less luminous than with a common pump sprayer. To ensure a strong luminescence and good quality pictures, it is therefore recommended to use the ECOSPRAY in conjunction with BLUESTAR FORENSIC MAGNUM, which produces a more intense and longer-lasting reaction than the regular BLUESTAR. Results are then optimum.
Ecospray
L x l x H : 105 x 50 x 130 mm
Weight (empty) : 190 grams
Life time guarantee
Container in crystal PETG + white PP screw cap
Maximum capacity 125 ml / 4 oz
Gas reservoir: Aluminum solid cast
Resists internal pressure up to 18 bars
Propels 440 ml / 15 oz
| Flow according to nozzle | |
| NOZZLE | FLOW |
| Diam. 0,50 mm | 0,27 ml/s |
| Diam. 0,70 mm | 0,45 ml/s |
| Diam. 0,90 mm | 0,75 ml/s |
Click on the images to enlarge.
Please refer to the list of distributors.
| HOME | WHERE TO BUY | DOCUMENTATION | CONTACT |
| Webdesign © 2004 www.redaxys.com |